WATER COOLED PUMP SET

‘BSA’ WATER COOLED DIESEL PUMP SETS

5 H.P. TO 30 H.P. Available in 1500/1600/1800 R.P.M We are a trustworthy Water Cooled Pump Sets Manufacturer, Exporter and Suppliers. Our Water Cooled Diesel Pump Sets have different fuel capacities. They are based upon one of the effective mechanisms.

The cooling system of our Diesel Engine Pump Sets is completely based on air which adds to its reliability. It comes in two starting options i.e. hand starting & self starting.

 

Single stage, end suction type centrifugal pump sets for small and large Irrigation and agriculture, higher efficiency and dependable performance are the factors contributing to the success of BSA pump sets.


Main features of BSA Pump sets:

•      BSA pump sets are good-looking, powerful and easy to operate.

 

 

•      BSA pump sets consumes less fuel and suck & throw more water.

•      The spare parts & taper roller heavy duty main bearings of BSA pump sets are easily available.

•      BSA pump sets have a capacity of much more than one lack liter of water per hour.

•      All working parts of BSA pump sets are as per ISI standards.  

Technical Specification

PARTICULARS 5HP/BSV-1 6.5HP/BSV-2 8HP/BSV-6 10HP/BSV-7 15HP/BSV-17 18HP/BSAT-20
NO OF CYLINDER ONE ONE ONE ONE ONE ONE
BORE X STROKE (MM) 80 X 110 85/110 87.5/110 95/110 114.3/116 120X120
CUBIC CAPACITY (CC) 553 624 662 780 1180 1385
COMPRESSION RATIO 04:01:00 PM 04:01:00 PM 05:01:00 PM 17.5 : 1 04:01:00 PM 04:01:00 PM
RATED OUTPUT AT 5 H.P. 6.5 H.P. 8 H.P. 10 H.P 16 HP 18 HP
1500 RPM (3.7 kW) (4.8 Kw) (5.9 kW) (7.36 kW) (11.78kW) (13.25kW)
SPECIFIC FUEL 230 g/kWh (169.28 g/bhp-h) 240 g/kWh (176.64 g/bhp-h) 240 g/kWh (176.64 g/bhp-h) 250 g/kWh (184.74 g/bhp-h) 251 g/kWh (184.74 g/bhp-h) 251 g/kWh (184.74 g/bhp-h)
NET & GROSS WEIGHT( APPROX) 160 KG & 230 KG 165 KG & 235 KG 170 KG & 240 KG 180 KG & 250 KG 237 KG & 307 KG 245 KG & 315 Kg

Technical Data of Regular Pump Sets

PARTICULARS OF PUMP SETS 5 HP/ 80X65 MM PUMP 6.5 HP/80X80 MM PUMP 8 HP/100X80 MM PUMP 10 HP/100X100 MM PUMP 12 HP/125X125 MM PUMP 15HP/150X150 MM PUMP
TOTAL HEAD (M) 18 14 11 12 11 13
DISCHARGE L/SEC 14 21.5 31 33 35 50
HEAD RANGE (M) 16.09-19.02 11.75-15 8.5-12 8-14 9-12.2 12-16
DISCHARGE RANGE 16.08-11.05 25-19 36-28 40-30 44-35 60-40

Technical Data High Head Pump Sets

PARTICULARS OF PUMP SETS 10 HP/80X65 MM PUMP 18 HP/100X80 MM PUMP 20HP/100X80MM MM PUMP
IMPELLER DIA(MM) 250 328 330
SPEED(R.P.M) 1600 1600 1600
HEAD RANGE (M) 17.5-24 8-45 12-55
DISCHARGE RANGE 25-9 40-12 35-10

Specifications Engine 

Type Vertical Totally Enclosed, Compression Ignition, Four Stroke Cycle Cold Starting, Water Cooled Diesel Engine
Combustion Direct Injection Combustion Between Chamber And Aluminum Alloy Piston In Combination With A Long Stem Multi Hole Nozzle Resulting Low Fuel Consumption And Easy Starting.
Fuel System Fuel Is Supplied To The Fuel Pump By Gravity Feed, Through The Fuel Tank And An Efficient Filter.
Fuel Tank Capacity 5 Liters.(5, 6.5, 7.5 Hp) & 10 Liters ( 8,9,10 Hp) & Above That 15 Liters. (35 Liter Separate Tank, If Required Optional)
Lub. Oil Sump Capacity 3.75 Liters In Single Cylinder & 6.75 Liters In Double Cylinder At Higher Level
Lub Oil Consumption 1% Of Specific Fuel Consumption.
Cooling Run through Water
Governing Class 'B1'
Rotation Clockwise While Facing The Fly Wheel.
Starting Hand Start( Self Start Optional)
Standard Accessories Starting Handle, operator Manuel And Necessary Tools.